DrawCADDrawCAD

Hinge CAD Drawing Generator

Describe leaf length, leaf width, knuckle count, pin diameter, and swing angle. DrawCAD turns it into a CAD-style hinge image for hardware concepts, assembly notes, and enclosure design reviews.

Butt and piano hingesKnuckle countsOpen and closed statesCAD-style images

Kimenet: CAD stílusú PNG · nem szerkeszthető CAD fájl

How to generate a hinge drawing
Hinge concepts from text
Task context

How to generate a hinge drawing

Pick the hinge family: butt, piano, concealed cup, friction, or living hinge.
Give leaf length and width, plate thickness, knuckle count, and pin diameter.
Say which states to draw: closed, open at 90 or 110 degrees, or both side by side.
Knuckle and swing map

Hinge drawing prompts

Start from a hinge family, then change leaf dimensions, knuckle count, screw pattern, and the states you want drawn.

CAD-style drawing of a five-knuckle steel butt hingeHinge family: buttLeaf length: 75mmLeaf width: 30mmLeaf thickness: 2.5mmKnuckle count: 5knuckles

Concept dimensions guide the prompt and visual only; they are not manufacturable CAD geometry or production drawings.

Feladatcsomag

Configure a hinge drawing

More parameters
Létrehozott prompt

Create a dimensioned CAD-style technical drawing of a hinge, with coherent flat and open views, visible knuckle interleaving, pin axis, screw-hole callouts, and leaf dimensions. standard butt hinge with two rectangular leaves interleaved around a full-length knuckle pin. Leaf length: 75mm. Leaf width: 30mm. Leaf thickness: 2.5mm. Knuckle count: 5knuckles. Pin diameter: 6mm. four 4.5 mm countersunk screw holes per leaf on a 20 mm pitch, staggered away from the knuckle line. drawn twice, once closed and once opened to 110 degrees, with the pin axis marked and the swing arc annotated.

Beépített sablonok

Hinge CAD-style examples

Gyakran feltett kérdések

Can DrawCAD show the hinge at a specific opening angle?

Yes. Name the angle in the prompt, such as shown closed and opened to 110 degrees, and ask for both states in the same image with the pin axis marked.

How do I get a concealed cup hinge to look right?

State the cup diameter and boring depth. A 35 mm cup bored to 12.5 mm is the furniture standard. Then add the mounting-plate type, the arm overlay, and the cup-to-edge distance.

Is the generated hinge load-rated?

No. Leaf thickness, pin material, knuckle bearing area, and door weight all decide load capacity. The image is a concept visual, not a rated hardware specification.

Related part drawing generators

Phone stand concepts from textPhone Stand CAD Drawing GeneratorEnclosure concepts from textEnclosure CAD Drawing GeneratorTechnical CAD drawingsAI Technical Drawing Generator

Több generálásra van szükség?

A frissítés után több pontot, nagyobb felbontást és vízjel nélküli exportálási lehetőséget kapsz.

Árak megtekintése