DrawCADDrawCAD

Fixture CAD Drawing Generator

Describe how a workpiece is located, supported, and clamped, then generate a CAD-style fixture image for manufacturing discussions, setup documentation, and early workholding concepts.

Jigs and fixturesLocators and clampsWorkholding conceptsCAD-style images

출력: CAD 스타일 PNG · 편집 불가능한 CAD 파일

How to generate a fixture drawing
Fixture concepts from text
Task context

How to generate a fixture drawing

Describe the workpiece, operation, and critical datum surfaces.
Add base geometry, locators, supports, clamps, tool access, and release direction.
Generate an assembly or exploded image, then refine loading and clearance details.
Datum and clamp sequence

Fixture drawing prompts

Try drilling, machining, assembly, and welding fixtures with different locator and clamping strategies.

CAD-style exploded drawing of a drill guide fixtureFixture type and operation: drill-jigWorkpiece and critical datums: 120 x 60 x 20 aluminum plate; bottom face datum A, long edge datum BLocating scheme: 3-2-1Clamping method: toggleMachine or cell interface: t-slots

Concept dimensions guide the prompt and visual only; they are not manufacturable CAD geometry or production drawings.

임무 키트

Configure a fixture drawing

More parameters
생성된 프롬프트

Create a dimensioned CAD-style assembly drawing of a manufacturing fixture, showing the workpiece, datum locating scheme, supports, clamps, machine interface, tool access, loading direction, and exploded construction. drill jig with replaceable hardened guide bushings and clear spindle access. Workpiece and critical datums: 120 x 60 x 20 aluminum plate; bottom face datum A, long edge datum B. 3-2-1 locating scheme with three hardened rest pads, two side locators, and one end stop. two vertical toggle clamps applying force directly above the primary supports. slotted base mounting compatible with standard machine-table T-slots and step clamps. machined aluminum base plate with datum edges, relief pockets, and steel wear inserts.

내장 템플릿

Fixture CAD-style examples

자주 묻는 질문

Can DrawCAD design a fully constrained 3-2-1 fixture?

It can visualize stated locators and clamps, but it does not calculate constraint sufficiency, cutting forces, deformation, or repeatability.

How do I keep tool access visible?

Name the operation, spindle or torch approach direction, keep-out zones, and request a view with the workpiece and clamps assembled.

Is this output ready for shop-floor use?

No. DrawCAD outputs CAD-style images, not verified fixture assemblies, toleranced production drawings, STEP models, STL files, or safety documentation.

Related part drawing generators

Bracket concepts from textBracket CAD Drawing GeneratorFlange concepts from textFlange CAD Drawing GeneratorEnclosure concepts from textEnclosure CAD Drawing GeneratorGear concepts from textGear CAD Drawing Generator

더 많은 생성 횟수가 필요하신가요?

업그레이드하면 더 많은 포인트, 더 높은 해상도, 워터마크 없는 파일 내보내기 기능을 이용할 수 있습니다.

가격 확인하기