DrawCADDrawCAD

Caster CAD Drawing Generator

Describe wheel diameter, tread width, swivel offset, top-plate hole pattern, and brake type. DrawCAD returns a CAD-style caster image for equipment layouts, spec sheets, and mounting studies.

Swivel and rigid forksTop-plate patternsBrakes and locksCAD-style images

출력: CAD 스타일 PNG · 편집 불가능한 CAD 파일

How to generate a caster drawing
Caster concepts from text
Task context

How to generate a caster drawing

Choose swivel or rigid, plus the mounting style: top plate, threaded stem, or single bolt hole.
Give wheel diameter and tread width, fork height, swivel offset, and overall mounted height.
Add the top-plate hole pattern and brake type, then pick a side, top, or exploded view.
Plate pattern planner

Caster drawing prompts

Pick a caster type, then set wheel diameter, mounting style, and the brake or lock you want shown.

CAD-style drawing of a 100 mm swivel casterCaster type: swivelWheel diameter: 100mmTread width: 32mmSwivel offset: 40mmOverall mounted height: 128mm

Concept dimensions guide the prompt and visual only; they are not manufacturable CAD geometry or production drawings.

임무 키트

Configure a caster drawing

More parameters
생성된 프롬프트

Create a dimensioned CAD-style technical drawing of a caster assembly, with coherent side, top, and isometric views, visible fork and kingpin construction, mounting-plate hole pattern, and overall mounted height. swivel caster with a kingpin race that lets the fork rotate a full 360 degrees around the vertical axis. Wheel diameter: 100mm. Tread width: 32mm. Swivel offset: 40mm. Overall mounted height: 128mm. a rectangular top plate with rounded corners and four bolt holes on a rectangular pattern. a total-lock pedal that stops both the wheel tread and the swivel race, drawn engaged and released. polyurethane tread bonded to a cast iron core, with the tread and core boundary drawn as a separate line.

내장 템플릿

Caster CAD-style examples

자주 묻는 질문

Can DrawCAD size a caster for a given load?

No. Load rating depends on wheel material, bearing type, duty cycle, floor condition, and how many casters share the load. Take the rating from a manufacturer catalog, not from the image.

How do I show the top-plate hole pattern accurately?

Ask for a top view of the plate on its own and state plate size, hole diameter, hole-pattern spacing, and whether any holes are slotted for adjustment.

Can it show the caster mounted on a cart?

Yes. Describe the frame tube or panel it bolts to and ask for an assembly or section view. That also makes the swivel sweep clearance easy to read.

Related part drawing generators

Bracket concepts from textBracket CAD Drawing GeneratorFlange concepts from textFlange CAD Drawing GeneratorTechnical CAD drawingsAI Technical Drawing Generator

더 많은 생성 횟수가 필요하신가요?

업그레이드하면 더 많은 포인트, 더 높은 해상도, 워터마크 없는 파일 내보내기 기능을 이용할 수 있습니다.

가격 확인하기